Monday 23 November 2020

Compost Turner Maintenance Tips

Adhere to the class maintenance and handover system, the maintenance and failure of the previous class will not be left to the next class.

Check the items of each class before driving:

1. Check whether the fasteners are firm and whether the bearing clearance of gearbox components is appropriate. If the bearing clearance is too loose, the phenomenon of large rotating resistance will occur, and the gap should be adjusted improperly.

2. Lubricate the bearing housing and check the oil level of the gearbox.

3. Whether the wire connection is reliable.

After class maintenance

1. Remove residues and residues from the machine and surrounding areas.

2. Add lubricating oil to each lubricating point.

3. Turn off the power switch.

Weekly maintenance items:

1. Check the oil content of gearbox and add enough gear oil.

2. Remove the accumulated material in the blank hole and keep the slide way open.

3. Check the contact of the compactor in the electric cabinet (if any) and replace it immediately.

Regular inspection items

1. Check the operation of the motor reducer. If there is any abnormal noise or heat, please stop the inspection immediately.

2. Check the wear of all bearings. Wear should be replaced.

Judgment and treatment of common faults:

Analysis and treatment of common faults

It is difficult to remove the redundant layer of fertilizer because of the difficulty in turning and throwing the fertilizer layer

Repair blade or shaft with serious deformation of blade and shaft or winding; remove allogeneic.

Foreign matter stuck or damaged in gearbox teeth, remove foreign matter or shift gear

Unstable reducer with noise or heat, walking device or frame, with foreign matter to remove foreign matter

Correction and replacement of drive shaft bending

Lack of lubricating oil add lubricating oil

The motor is difficult to start or unable to start. The size is too large or the bearing is worn and damaged. Replace the bearing

Correct or replace the shaft deformation and bending

The voltage is too low or too high to restart after the voltage is normal

Go to https://compostturnermachine.com/ for more types of compost turner machine.



No comments:

Post a Comment