In the production process of biological fertilizer project, the maintenance of equipment is also very important. Regular maintenance can prolong the service life of your equipment and replace unqualified parts in time to avoid accidents during operation and affect the equipment. Normal production will cause losses to you.
1、 Daily maintenance of cow dung fermentation organic fertilizer Dumper:
The stacker shall be maintained once a week when it is not operated frequently, and daily maintenance shall be carried out when it is operated frequently. Maintenance contents:
1. Half maintenance inspection (after working for 10 hours), check whether the connecting bolts, nuts and oil drain plugs are loose.
2. Check whether the bolts at all parts have defects of cotter pins and replace them in time (cotter pins cannot be replaced with other items).
3. Check whether the rotary knife is lost and whether the fastening bolt is loose. If necessary, repair, tighten or replace with a new knife.
4. Check whether the electrical connectors are fastened and whether the wire insulation is good. Repair or replace in time if necessary.
5. Check whether the fastening screws of diesel engine, gearbox and bearing seat are loose.
6. Clean the circuit board accessories on the stacker.
7. Check the remaining quantity of oil tank and water tank.
2、 Regular maintenance of the composter for cow manure fermentation
1. After one season of operation, replace the gearbox gear oil, check the bearings at all parts, disassemble and clean them with new grease and install them. Replace if worn.
2. Remove the cab seat and seat lower cover plate, check and tighten the bolts on the transmission shaft. Prevent the shaft from tilting and breaking due to the loose transmission shaft caused by the loose bolts on the transmission shaft seat.
3. Add antifreeze to the water tank in winter. If antifreeze is not added, warm water shall be added before operation. After the operation, the water in the water tank, body and cooler should be drained to prevent freezing.
4. Check whether the electrical appliances work normally and the circuit insulation performance is good. If necessary, replace the connected wires.
5. For long-term operation of the stacker, all exposed parts shall be oil and rust proof, and shall be covered when placed outdoors.
We produce a variety of compost tilters for fertilizer manufacturing process. Welcome to inquire.
More detailed info on compost fertilizer production go to https://www.fertilizer-plants.com/commercial-composting-equipment/
No comments:
Post a Comment